Siemens Sicam P850 7KG85 Series - Page 149

7 Operation at Use of a PC
7.3 Configuration of the Device
149SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
A new file is created after a PQDIF/CSV file has been completely recorded.
Figure 7-43 Creating PQDIF/CSV Files of the Measured Value Recorder
11:00 11:10
12:00 Time
11:00 11:10
12:00 Time
11:00 11:10 12:00
Time
11:15 11:30
11:40
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF/CSV file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF/CSV file
…
The device
shut down
The device
turn on again
The device
shut down
The device
turn on again
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF/CSV file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF/CSV file
…
1) 11:10 a.m. to 12:00 p.m. : 1st PQDIF/CSV file
2) 12:00 p.m. to 01:00 p.m. : 2nd PQDIF/CSV file
…
12:10
Data (recording status)