Siemens Sicam P850 7KG85 Series - Mechanical Stress Tests

13 Technical Data
13.2 Test Data
274 SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
13.2.2 Mechanical Stress Tests
Vibration and Shock Stress during Stationary Operation
Vibration and Shock Stress during Transport
Standards: IEC 60068
Oscillation
IEC 60068-2-6 test Fc
Sinusoidal
10 Hz to 60 Hz: 0.075 mm amplitude; 60 Hz to 150 Hz:
1 g acceleration
Frequency sweep rate 1 octave/min 20 cycles in 3 or-
thogonal axes.
Shock
IEC 60068-2-27 test Ea
Semi-sinusoidal
5 g acceleration, duration 11 ms, each 3 shocks in both
directions of the 3 axes
Seismic Vibration
IEC 60068-3-3 test Fc
Sinusoidal
1 Hz to 8 Hz: 7.5 mm amplitude (horizontal axis)
1 Hz to 8 Hz: 3.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 2 g acceleration (horizontal axis)
8 Hz to 35 Hz: 1 g acceleration (vertical axis)
Frequency sweep 1 octave/min
1 cycle in 3 orthogonal axes
Standards: IEC 60068
Oscillation
IEC 60068-2-6 test Fc
Sinusoidal
5 Hz to 8 Hz: 7.5 mm amplitude;
8 Hz to 150 Hz: 2 g acceleration
Frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Shock
IEC 60068-2-27 test Ea
Semi-sinusoidal
15 g acceleration, duration 11 ms,
each 3 shocks (in both directions of the 3 axes)
Continuous Shock
IEC 60068-2-29 test Eb
Semi-sinusoidal
10 g acceleration, duration 16 ms,
each 1000 shocks (in both directions of the 3 axes)
Free fall
IEC 60068-2-32 test Ed
0.5 m