Siemens SIMATIC 6DL1193-6AG00-0AA0 - Preface

Preface
3
Purpose of the documentation
This documentation explains the use of the BusAdapters for PROFINET IO.
You can 󹪝nd information about the electrical and optical networks (including cables and cable
lengths) in the system manual "SIMATIC NET; Industrial Ethernet / PROFINET; Passive Network
Components (
https://support.industry.siemens.com/cs/ww/en/view/84922825)".
Validity of the documentation
This documentation applies to the following products:
• Distributed I/O System ET 200SP HA
• Compact Field Unit (CFU)
Validity of the information on the components
• Insulation, protection class and degree of protection
Information on insulation, protection class and degree of protection can be found in the
system manual of the respective I/O system that is used, e.g. ET 200SP HA.
• Standards and approvals
Information on standards and approvals can be found in the system manual of the respective
I/O system that is used, e.g. ET 200SP HA.
Note
Markings and approvals
In the manual you can 󹪝nd the markings and approvals which are generally possible or planned
in the system.
The identi󹪝cation or approval that is printed on the respective BusAdapter continues to be
exclusively valid.
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 11