4.4.3 Connecting the cable to the BusAdapter
Requirement
• The BusAdapter BA 2xFC is detached from the I/O.
• The jacket of the PROFINET connecting cable is stripped.
Procedure
1. Push back the locking slide.
① Locking slide
2. Open the cover of the connection element.
3. Flip up the wire guide until it stops.
② Wire guide
Installation
4.4 BusAdapter BA 2xFC
BusAdapter for Distributed I/O
18 Equipment Manual, 10/2021, A5E39261458-AC
To Next Page
Loading...
