Siemens SIMATIC 6DL1193-6AG00-0AA0 - Busadapter 2 Xrj45 Vd HA

4.9 BusAdapter 2xRJ45VD HA
De󹪝nition
You connect the IO device to the PROFINET IO system using a 2-wire system with copper wires
via the BA 2xRJ45VD HA BusAdapter.
NOTICE
Application of the BusAdapter
If you want to use this BusAdapter in the system, you need to note the following:
• Ensure that the approved transfer rate of 100 Mbps is maintained.
• The "Time stamping" function with modules of the distributed I/O (ET 200SP HA) cannot be
used.
Description
The BusAdapter BA 2xRJ45VD HA is designed as follows:
Installation
4.9 BusAdapter 2xRJ45VD HA
BusAdapter for Distributed I/O
30 Equipment Manual, 10/2021, A5E39261458-AC