Siemens SIMATIC 6DL1193-6AG00-0AA0 - Busadapter BA LC;FC

See also
SIMATIC NET; Industrial Ethernet / PROFINET; Passive Network Components (
https://
support.industry.siemens.com/cs/ww/en/view/84922825)
4.7 BusAdapter BA LC/FC
De󹪝nition
You connect the IO device to the PROFINET IO system via the BusAdapter BA LC/FC.
Description
The nodes communicate over two ports.
• Port 1 o󹪜ers the option of connecting an LC connector.
When data is transferred via port 1, it is 󹪝rst sent as a di󹪜erential signal to the LC transceiver.
It is converted there for optical data transmission and vice versa.
• Port 2 allows the connection of a FastConnect cable.
When data is transmitted via port 2, the di󹪜erential signals of the base device are output
electrically isolated via the BusAdapter.
The BusAdapter BA LC/FC is designed as follows:
Installation
4.7 BusAdapter BA LC/FC
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 27