Siemens SIMATIC 6DL1193-6AG00-0AA0 - Page 17

Required accessories
• Industrial Ethernet Fast Connect Stripping Tool (6GK1901‑1GA00) with green blade cassette
(6GK1901‑1B...) for Fast Connect cable
• FastConnect cables (recommended types):
– IE FC TP Standard Cable GP 2x2 (6XV1840-2AH10)
– IE FC TP Trailing Cable 2x2 (6XV1840-3AH10)
– IE FC TP Marine Cable (6XV1840-4AH10)
– IE FC TP Flexible Cable GP 2x2 (6XV1870-2B)
– IE FC TP Trailing Cable 2x2 (6XV1870-2D)
– IE TP Torsion Cable 2x2 (6XV1870-2F)
– FC TP FRNC Cable GP (6XV1871-2F)
– IE FC TP Food Cable GP 2x2 (6XV1871-2L)
– IE FC TP Festoon Cable 2x2 (6XV1871-2S)
Required tools
Screwdriver:
• TORX T10
or
• 3.5 mm blade width
Procedure
Strip the jacket of the PROFINET connecting cable as follows:
D
E
Stripping length (outer jacket) Length of the remaining braided shield
Distance a: 25 mm +-1 mm Distance b: 5 mm
Result
The jacket of the PROFINET connecting cable is stripped.
Installation
4.4 BusAdapter BA 2xFC
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 17