WARNING
Explosion hazard
If the electric circuit is live, the following must be observed:
• Do not disconnect the device in a ammable or combustible atmosphere.
• Do not open the housing in a ammable or combustible atmosphere.
WARNING
Area of application
This device is suitable for use in environments of Class 1, Division 2, Groups A, B, C, D; Class 1,
Zone 2, Group IIC, or non-hazardous locations only.
NOTICE
Removal and replacement
When you replace components, compliance with Class 1, Division 2 might become invalid.
Replacing components can aect the usability of the device.
Special conditions for safe use of the BusAdapter
BusAdapter for Distributed I/O
Equipment Manual, 10/2021, A5E39261458-AC 9
To Next Page
Loading...
