1-6
C7-621 / C7-621 AS-i Control Systems
C79000-G7076-C621-01
Table 1-1 Components that Can Be Connected to a C7, continued
Component SchematicFunction
Programming device (PG) or PC
with the STEP 7 software
package and ProTool or Pro
Tool/Lite
...configures, assigns
parameters, programs, and tests
the C7.
RS 485 repeater ...amplifies the signals in an
MPI or PROFIBUS DP network
and connects segments of an
MPI or PROFIBUS DP network.
Sensors and actuators
AS-i slaves Refer to the various catalogs
(applies only to the C7-621
AS-i).
Product Overview
To Next Page
Loading...
