Siemens SIMATIC ET 200AL - Address Space with Value Status; DIQ Mode Address Space (With Value Status)

Configuration modes for digital inputs/outputs
3.3 Parameters/address space
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Manual, 03/2019, A5E38688112-AC
25
Configuration mode DIQ with value status
The figure below shows the assignment of the address space for the digital input/digital
output module DIQ 16x24VDC/0.5A 8xM12 with value status (Quality Information, QI) in the
configuration method DIQ.
The address space for the value status is allocated by the module, if the value status is
configured using the PROFINET interface module.
Figure 3-3 Address space in DIQ with value status configuration mode
Configuration mode DQ16
In DQ16 configuration mode, the address space is reduced by the fixed parameter
assignment.
Figure 3-4 Address space in DQ16 configuration mode