Siemens SIMATIC ET 200AL - 4 xCount Counter Parameters; Counter 0-3 Parameter Details (4 xCount)

Counting
4.2 Configuration method 4xCount
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
56 Manual, 03/2019, A5E38688112-AC
4.2.2 Parameters/address space
4.2.2.1 Parameters
In the configuration method 4xCount of the digital input / digital output module DIQ
16x24VDC/0.5A 8xM12 the Channels 0 to 7 are used by the counting function. The
Channels 8 to 15 can be parameterized freely.
The following table shows the general parameter of the module.
Table 4- 21 General parameters
Parameters
Value range
Default
Scope
Diagnostics: Missing load voltage
2L+
• Disable
• Enable
Disable Module
Diagnostics: Short-circuit to
ground
• Disable
• Enable
Disable Module
(Short-circuit of the
encoder supply or
of the output to
ground)
Behavior at CPU/master STOP
(8...15)
• Shut down
• Keep last value
• Output substitute
value
Shut down Module
(digital outputs)