Siemens SIMATIC ET 200eco PN M12-L - Page 23

Parameters/address space
4.1 Parameters
Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0
22 Equipment Manual, 09/2020, A5E49284833-AA
Parameters Value range Default Scope with configu-
ration software, e.g.
STEP 7 (TIA Portal)
Inspection Level/Data Stor-
age*
• Same type (V1.0)
without Back-
up&Restore
• Type compatible
(V1.1) without
Backup&Restore
• Type compatible
(V1.1) with Back-
up&Restore
• Type-compatible
(V1.1) with Re-
store
Type-compatible
(V1.1) with Back-
up&Restore
Channel
Port cycle time*
-
As short as possible
Channel
* Only effective if you use the "IO-Link manual" port mode.