Siemens SIMATIC ET 200eco PN M12-L - 4 Parameters;Address Space; Parameters

Communication module CM 8x IO-Link + DI 4x24VDC M12-L (6ES7148-6JG00-0BB0
Equipment Manual, 09/2020, A5E49284833-AA
21
Parameters/address space
4
4.1 Parameters
Parameters
The following table shows the parameters that you can set for each port (each submodule) of
the IO-Link master CM 8xIO-Link + DI 4x24VDC M12-L.
Table 4- 1 Diagnostics and port parameters
Parameters Value range Default Scope with configu-
ration software, e.g.
STEP 7 (TIA Portal)
Diagnostics
Diagnostics: Missing 2L+
• Disable
• Enable
Disable
Channel
Diagnostics undervoltage 1L+
• Disable
•
Enable
Disable
Channel
Diagnostics: Port
• Disable
• Enable
Disable
Channel
Hardware interrupt (device
notification)
• Disable
•
Enable
Disable
Channel
Port configuration
Port configuration without S7-
PCT
• Disable
•
Enable
Disable
Channel
Operating mode
• IO-Link autostart
• IO-Link manual
0
Channel
Vendor ID**
Vendor ID of the
connected IO-Link
device
0
Channel
DeviceID*
Device ID of the con-
nected IO-Link device
Channel