Siemens SIMATIC ET 200pro - Page 10

Product overview
2.2 What is the ET 200pro distributed I/O system?
ET 200pro distributed I/O EtherNet/IP interface module
10 Manual, 03/2016, A5E32861915-AB
Example configuration with electronic modules
The ET 200pro EtherNet/IP module can be equipped up to the maximum configuration with
electronic modules. Between an interface module and a terminating module you can adapt
the electronic modules to your application in whatever configuration you require.
The figure below shows an example configuration of the ET 200pro distributed I/O system.
①
ET
200pro EtherNet/IP interface module (with connection module)
②
8 DI DC 24V
③
4 DO DC 24V/2.0A
④
4 AI U HF
⑤
4 AI I HF
⑥
8 DI DC 24V
⑦
Terminating module
⑧
8 x switches, sensors
⑨
4/8 x load
⑩
4 x voltage measurement
⑪
4 x current measurement for 2
-/4-wire measuring transducer
⑫
Actuator/sensor distributor