Siemens SIMATIC ET 200pro - Shipping and Storage Conditions

General technical specifications
6.3 Shipping and storage conditions
ET 200pro distributed I/O EtherNet/IP interface module
70 Manual, 03/2016, A5E32861915-AB
Emission of radio interference
Interference emission of electromagnetic fields in accordance with EN 55016: Limit Value
Class A, Group 1 (measured at a distance of 10 m).
Frequency
Emitted interference
from 30 to 230 MHz
< 40 dB (µV/m)Q
from 230 to 1000 MHz < 47 dB (µV/m)Q
6.3
Shipping and storage conditions
Shipping and storage conditions
The ET 200pro distributed I/O system surpasses the IEC 61131-2 requirements for shipping
and storage conditions. The specifications below apply to modules that are transported and
stored in their original packaging.
Type of condition
Permissible range
Free fall
≤ 1 m
Temperature –40 °C to +70 °C
Temperature change
20 K/h
Barometric pressure 1080 hPa to 660 hPa (corresponds to an altitude of -
1000 m to 3500 m)
Relative humidity
5% to 95%, without condensation