Siemens SIMATIC ET 200pro - 4.7 Software Motor Starter ES

General technical specifications
6.4 Mechanical and climatic environmental conditions
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
71
6.4
Mechanical and climatic environmental conditions
Climatic environmental conditions
The following climatic environmental conditions apply (indoor use only):
Environmental requirements
Areas of application
Remarks
Temperature
0 °C to 55 °C *
All mounting positions
Temperature change 10 K/h -
Relative humidity
5% to 100%
with condensation
Barometric pressure 1080 hPa to 795 hPa Corresponds to an altitude of -
1000 m to 2000 m
Concentration of pollutants SO
2
: <0.5 ppm;
RH < 60%, no condensation
H
2
S: <0.1 ppm;
RH < 60%, no condensation
-
* The FESTO CPV10 and CPV14 valve terminals deviate from the specified operating temperature
range of 0 to 55 °C. For the temperature operating range of FESTO valve terminals, refer to the cor-
responding FESTO Operating Manuals.
Modules for use in the -25 °C to 55 °C temperature range
The following modules support operation in the -25 °C to 55 °C temperature range (indoor
use only):
Designation
Order number
IM 154-3 PN High Feature with terminating module
ZNX:EIP200PRO
CM IM M12, 7/8"
ZNX:EIP200PROCM1
PM-E DC 24V
6ES7148-4CA00-0AA0
PM-O DC 2x24V
6ES7148-4CA60-0AA0
CM PM Direct
6ES7194-4BC00-0AA0
CM PM ECOFAST
6ES7194-4BA00-0AA0
CM PM 7/8"
6ES7194-4BD00-0AA0
CM PM PP
6ES7194-4BE00-0AA0
CM PM-O PP
6ES7194-4BH00-0AA0
CM IO 4 x M12
6ES7194-4CA00-0AA0
CM IO 4 x M12P 6ES7194-4CA10-0AA0
CM IO 4 x M12 Inverse
6ES7194-4CA50-0AA0
CM IO 8 x M12 6ES7194-4CB00-0AA0
CM IO 8 x M12P
6ES7194-4CB10-0AA0
CM IO 8 x M12D
6ES7194-4CB50-0AA0
CM IO 8 x M8
6ES7194-4EB00-0AA0
CM IO 2 x M12
6ES7194-4FB00-0AA0
CM IO 1 x M23
6ES7194-4FA00-0AA0
8 DI DC 24V
6ES7141-4BF00-0AA0