Siemens SIMATIC ET 200pro - Page 72

General technical specifications
6.4 Mechanical and climatic environmental conditions
ET 200pro distributed I/O EtherNet/IP interface module
72 Manual, 03/2016, A5E32861915-AB
Designation
Order number
16 DI DC 24V
6ES7141-4BH00-0AA0
4 DO DC 24V/2.0A 6ES7142-4BD00-0AA0
8 DO DC 24V/0.5A
6ES7142-4BF00-0AA0
8 DI DC 24V High Feature 6ES7141-4BF00-0AB0
4 DO DC 24V/2.0A High Feature
6ES7142-4BD00-0AB0
4 DI / 4 DO DC 24V/0.5A
6ES7143-4BF50-0AA0
4 DIO / 4 DO DC 24V/0.5A
6ES7143-4BF00-0AA0
4 AI U High Feature
6ES7144-4FF00-0AB0
4 AI U High Feature
6ES7144-4FF01-0AB0
4 AI I High Feature
6ES7144-4GF00-0AB0
4 AI I High Feature
6ES7144-4GF01-0AB0
4 AI RTD High Feature
6ES7144-4JF00-0AB0
4 AI TC High Feature
6ES7144-4PF00-0AB0
4 AO U High Feature
6ES7145-4FF00-0AB0
4 AO I High Feature
6ES7145-4GF00-0AB0
Mechanical environmental conditions
The table below shows the mechanical environmental conditions in the form of sinusoidal
oscillation.
Modules
Frequency range
Continuous
Infrequent
Interface, electronic, and
connection modules;
Pneumatic interface modules
with FESTO valve terminals
5 ≤ f ≤ 8 Hz
15 mm amplitude
-
8 ≤ f ≤ 150 Hz 5 g constant acceleration 10 g constant acceleration