Siemens SIMATIC ET 200pro - Page 67

General technical specifications
6.1 Standards and approvals
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
67
Approval
Underwriters Laboratories Inc. acc. to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
Note
For the pneumatic interface module, no cULus approval has been applied for.
NEMA classification of ET 200pro (for the US market)
The ET 200pro distributed I/O system conforms to the NEMA classification: Enclosure rating
type: 4X indoor use only.
Marking for Australia and New Zealand
The ET 200pro distributed I/O system satisfies the requirements of the AS/NZS CISPR 16
standard.
IEC 61131
The ET 200pro distributed I/O system satisfies the requirements and criteria of IEC 61131-2
(Programmable Logic Controllers, Part 2: Equipment Requirements and Tests).
EtherNet/IP standard
The ET 200pro EtherNet/IP module complies with EtherNet/IP Specification CIP Networks
Library Volume 2: EtherNet/IP Adaption of CIP, Edition 1.12.
Use in industrial environments
SIMATIC products are designed for use in industrial applications.
Area of application
Interference emission requirement
Interference immunity requirement
Industry
EN 61000-6-4: 2007
EN 61000-6-2: 2005