Siemens simatic et200sp Equipment Manual

Technical specifications
CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)
32 Equipment Manual, 05/2021, A5E03506268-AD
Article number
6ES7510-1DJ01-0AB0
Clock synchronization
• supported
Yes
• to DP, master
Yes; Via CM DP module
• to DP, slave
Yes; Via CM DP module
• in AS, master
Yes
• in AS, slave
Yes
• on Ethernet via NTP
Yes
Interfaces
Number of PROFINET interfaces
1
Number of PROFIBUS interfaces
1; Via CM DP module
Optical interface
No
1. Interface
Interface types
• RJ 45 (Ethernet)
Yes; X1 P3; opt. X1 P1 and X1 P2 via BusAdapter
BA 2x RJ45
•
Number of ports
3; 1. integr. + 2. via BusAdapter
•
integrated switch
Yes
• BusAdapter (PROFINET)
Yes; compatible BusAdapters: BA 2x RJ45, BA 2x
FC, BA 2x M12
Protocols
•
IP protocol
Yes; IPv4
•
PROFINET IO Controller
Yes
•
PROFINET IO Device
Yes
•
SIMATIC communication
Yes
•
Open IE communication
Yes; Optionally also encrypted
•
Web server
Yes
• Media redundancy
Yes; MRP Automanager according to IEC 62439-2
Edition 2.0
PROFINET IO Controller
Services
–
PG/OP communication
Yes
–
Isochronous mode
Yes
– Direct data exchange
Yes; Requirement: IRT and isochronous mode
(MRPD optional)
–
IRT
Yes
–
PROFIenergy
Yes; per user program
–
Prioritized startup
Yes; Max. 32 PROFINET devices
– Number of connectable IO Devices,
max.
64; In total, up to 256 distributed I/O devices can
be connected via AS-i, PROFIBUS or PROFINET
–
Of which IO devices with IRT, max.
64

Siemens simatic et200sp Specifications

General

Category	I/O Systems
Power Supply	24 V DC
Protection Rating	IP20
Number of Modules	Up to 64 modules
Mounting	DIN Rail
Communication Protocols	PROFINET, PROFIBUS
Storage Temperature	-40 °C to +70 °C
Digital Inputs	Yes (depending on module)
Digital Outputs	Yes (depending on module)
Analog Inputs	Yes (depending on module)
Analog Outputs	Yes (depending on module)
Modularity	Modular
Relative Humidity	5 to 95% (non-condensing)
Weight	Varies by configuration
System Type	Distributed I/O