Siemens SIMATIC IPC847D - BIOS Setup Settings; Permitted Mounting Positions

SIMATIC IPC847D
24 A5E38018732-AD, 09/2017
Table 3
Plug-in scenarios
IRQ
Slot 6
Slot 7
Slot 8
Slot 6
Slot 7
Slot 8
Free
Free
Occupied
/
/
0x05
Free
Occupied
Free
/
0x0A
/
Free
Occupied
Occupied
/
0x0A
0x05
Occupied
Free
Free
0x0A
/
/
Occupied
Free
Occupied
0x0A
/
0x05
Occupied
Occupied
Free
0x0B
0x0A
/
Occupied
Occupied
Occupied
0x0B
0x0A
0x05
BIOS Setup settings
Change to section 8.6.6 of the operating instructions.
The change is valid as of BIOS V19.01.07.
The default setting of the DisplayPort audio device has been changed from "Enabled" to "Disabled".
Note
You have to change the following BIOS setting to "Enabled" if you want to use the audio function of the DisplayPort monitor:
Advanced > Video Configuration > Internal Graphic Device >
DPP Audio
Permitted mounting positions
Correction to sections 3.1.3, 1.2 and 3.3.6.5 of the operating instructions
Optional installation locations
The device can be mounted in control desks, switchboards and 19" rack systems, both horizontally and vertically.
Audio interfaces
Note
Figures in sections 1.2 and 3.3.6.5 of the operating instructions
The devices are supplied with monochrome black audio jacks as of May 2017.