Siemens SIMATIC PCS 7 - 4 Configuring the Process Tags and the Sequential Control; How to Copy the CFC Charts from the Zip File to the Master Data Library

Configuring the process tags and the sequential control
4
4.1 How to Copy the CFC Charts from the Zip File to the Master Data
Library
Introduction
Use the following standard templates from the
PCS 7 AP Library Vxx for configuration
purposes:
● MotorLean
● PIDConL_ConPerMon
● ValveLean
Requirements
● SIMATIC Manager is open in the Component view.
● You have created the "fast_MP" PCS 7 project as a multiproject using the PCS 7 Wizard
and opened it.
● The "S7 Program(1)/Charts" folder under "fast_Lib" is open.
● The latest PCS 7 AP Library Vxx has been installed.
Procedure
Step Action
1
● Select the menu command File > Open.
● Select the "Libraries" tab.
● In the list, select the entry "PCS 7 AP Library <Vxx>".
● Click "OK".
2 In SIMATIC Manager, select the menu command
Window > Arrange > Tile vertically.
Getting Started (V8.1 with APL)
Getting Started, 07/2014, A5E32713210-AA 29