Preparing the process picture for automatic generation
5
5.1 How to Prepare the Plant Display for Automatic Generation.
Introduction
To prepare for automatic process picture generation, take the steps described below.
Requirements
● You have completed the session in the PCS 7 Wizard "New Project".
● SIMATIC Manager is open and the "fast_MP" project and all open hierarchy folders are
displayed in the Plant view.
Procedure
Step Action
1 Select the "UNIT_A" folder in the left-hand window of the Plant view.
2 Open the shortcut menu of the "Picture(3)" object in the right window and then select the
Object Properties ... menu command.
3 Select the "Block icons" tab.
4 Select the "Derive block icons from the plant hierarchy" check box and click "OK".
5 Open the shortcut menu of the "UNIT_A" folder and select Plant Hierarchy > Customize.
The "Plant Hierarchy - Settings" dialog box opens.
6 Select the radio button in the "OS area" column for the second level in the "Level Settings"
group.
7 Select the "Derive picture hierarchy from the plant hierarchy" check box.
8 Click "OK".
Getting Started (V8.1 with APL)
Getting Started, 07/2014, A5E32713210-AA 43
To Next Page
Loading...
