SIMATIC Rack PC 840 V2
Getting Started, Edition 04/2004, A5E00248069-02
1-1
Introduction
1
Purpose of this documentation
This Getting Started documentation contains all the information you need for commissioning
and using the SIMATIC Rack PC 840 V2.
Where this documentation is valid
This documentation is valid for all supplied variations of the SIMATIC Rack PC 840 V2 and
describes the state of delivery as of April 2004.
Operating instructions for the SIMATIC Rack PC 840 V2
The operating instructions are available on the included "Documentation and Drivers" CD. To
view and print the operating instructions, run Start and follow the instructions on the screen.
The operating instructions provides useful information on many topics, e.g. hardware
expansion options, modification of the system configuration and technical data.
Conventions
The abbreviation Rack PC or device is also used within this documentation for the product
name SIMATIC Rack PC 840 V2.
Note
Safety Notices
To avoid damage to assets and for the sake of your own personal safety, please take note of
the information on safety in this Getting Started and in the operating instructions. A warning
triangle references this safety-related information and, depending on the potential hazard, is
shown as follows:
To Next Page
Loading...
Need help?
General
