Siemens SIMATIC S5 Operating Instructions

Transfer and Compare
Transfer contents of PC-memory into PU-memory
Call function selection menu with
Select PU-function
Nomenclature in menu: PC-MEM
INTO PU-MEM
This function is only possible in operating
mode
21 "PC WITH PC-MEM".
;
The switch on the CPU must be put in the
' "CYCLE" position.
alternatively: Discontinue function
Execute function
Display as long as transfer operation
is in progress;
Thereafter the function selection menue
is displayed.

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)