Siemens SIMATIC S5 Operating Instructions

l nserting statements
use positioning keys or search run
(see program outputting, page
18);
the statement in front of which a new
statement
is to be inserted is now dis-
played in the input field.
begin with corrections
see previous examples
end correction
Erasina statements
use positioning keys or search run
(see Program outputting, page
18);
the statement to be erased is now
displayed in the input field.
Note:
If
at the end of a correction key
is pressed instead of key
,
then the corrections are not trans-
ferred to the PU-memory.
Once correction has been started,
functions may be overwritten and
statements added or erased, in any
desired combination.
Furthermore,
positioning is possible with keys
and .

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)