Siemens SIMATIC S5 Operating Instructions

\
Cross reference for single operands
Call function selection menu with
Select PU-function
Nomenclature in menu: DIR. CROSS REFERENCE
Example: 1
1.6
End function
The network number
(NW) and the address (ADR)
are both displayed. Assignments, set- and
reset-statements are designated with a*.

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)