Siemens SIMATIC S5 Operating Instructions

Transfer contents of EPROM-module into PU-memory
Call function selection menu with
Select PU-function
Nomenclature in
menu: EPROM INTO PU-MEM
This function
is only possible in operating
mode 20 "PU OFF-LINE".
alternatively: Discontinue function
Execute function
Display as long as transfer operation
is in progress;
Thereafter the function selection menu
is displayed.
Transfer contents of PU-memory into EPROM-module
Call function selection menu with
Select PU-function.
Nomenclature in menu: PU-MEM INTO EPROM
This function
is only possible in operating
mode 20 "PU OFF-LINE".
alternatively: Discontinue function
Execute function
Display as long as transfer operation
is in progress;
Thereafter the function selection menu
is displayed.
3 6

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)