Siemens SIMATIC S5 Operating Instructions

Printing out the cross reference list
Call function selection menu with
Select PU-function
Printing out the cross reference
list
After the function has been selected,
operation must continue as follows:
The network number
(NW) and the address
(ADR) are both printed out. Assignments,
set- and reset statements are designated
with
a *.
Note:
Printing out may be discontinued by
pressing key
.

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)