Siemens Simatic S7-1500 / ET 200MP - Page 22

Configuring/address space
4.1 Configuring
Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA
21
Possible
applications
Components required Configuration software In the user program
Distributed opera-
tion with an
S7-300/400 CPU
• S7-300/400 automation
system
• ET 200MP distributed I/O
system
• TM FAST
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7:
Device configuration and parame-
ter setting of the module with GSD
file
Data records for managing the
TM FAST application (Page 63)
as well as writing (Page 68)
and reading (Page 69) the
user-defined acyclic data
1
:
Controlling the TM FAST ap-
plication (Page 41) via the
cyclic I/O data
Distributed opera-
tion in a third-
party system
• Third-party automation sys-
tem
• ET 200MP distributed I/O
system
• TM FAST
Third-party configuration software:
Device configuration and parame-
ter setting of the module with GSD
file
Data records for managing the
TM FAST application (Page 63)
as well as writing (Page 68)
and reading (Page 69) the
user-defined acyclic data
1
:
Controlling the TM FAST ap-
plication (Page 41) via the
cyclic I/O data
1
The use of LTMFAST_AppDownload is not possible in this application scenario.
When creating the TM FAST application (Page 41), you should in any case use the external
Intel® Quartus® Prime software to define the functionality of the I/O data and inputs/outputs
in the system and user logic, and to create the FPGA logic. With the MultiFieldbus
Configuration Tool software (MFCT) as of V1.5, you then generate an upd or db file from a
binary file of Intel® Quartus® Prime.
Hardware Support Package (HSP)
To use the technology module in TIA Portal V17, you need the HSP0368. The technology
module is integrated in the subsequent TIA Portal versions.
The Hardware Support Packages (HSP) are available for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
Alternatively, they can be accessed for downloading via the menu bar of STEP 7 (TIA Portal):
"Options > Support Packages > Download from the Internet".
GSD file for PROFINET IO
The GSD file for the ET 200MP distributed I/O system on PROFINET IO is available for
download on the Internet (http://support.automation.siemens.com/WW/view/en/68189683).