Siemens Simatic S7-1500 / ET 200MP - Technical specifications; Core Module Specifications and Features

Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA
51
Technical specifications
7
Article number
6ES7554-1AA00-0AB0
SIMATIC S7-1500, TM FAST Field Adaptable
High-Speed Technology, programmable with
Intel(R) Quartus(R) Prime software, 8xDI, 8xDQ,
4xDIQ 24 V, 8xRS485 DIQ, for extremely short
response time of less than 1 µs
General information
Product type designation
TM FAST
Firmware version
V1.0
• FW update possible
Yes
Product function
•
I&M data
Yes; I&M0 to I&M3
•
Isochronous mode
Yes
Engineering with
•
STEP 7 TIA Portal configurable/integrated from version
STEP 7 V17 with HSP or higher
•
PROFINET from GSD version/GSD revision
GSDML V2.35
Installation type/mounting
Rail mounting
Yes; S7-1500 mounting rail
Supply voltage
Load voltage L+
• Rated value (DC)
24 V
• permissible range, lower limit (DC)
19.2 V
• permissible range, upper limit (DC)
28.8 V
• Reverse polarity protection
Yes
Input current
Current consumption, max.
100 mA; without load
Power
Power available from the backplane bus
1.3 W
Power loss
Power loss, typ.
4 W
Address area
Address space per module
•
Inputs
32 byte
•
Outputs
32 byte