Siemens Simatic S7-1500 / ET 200MP - Configuring;address space; System Environments and Configuration Methods

Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA
20
Configuring/address space
4
4.1 Configuring
Introduction
The technology module functions can be controlled and monitored via the user program.
System environment
The technology module can be used in the following system environments:
Table 4- 1 Possible applications of the technology module
Possible
applications
Components required Configuration software In the user program
Central operation
with an
S7-1500 CPU
• S7-1500 automation system
• TM FAST
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
Instructions of the instruction
library TM FAST (Page 30):
Controlling the TM FAST ap-
plication (Page 41) via the
cyclic I/O data
Distributed opera-
tion with an
S7-1500 CPU
• S7-1500 automation system
• ET 200MP distributed I/O
system
•
TM FAST
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
Instructions of the instruction
library TM FAST (Page 30):
Controlling the TM FAST ap-
plication (Page 41) via the
cyclic I/O data
Distributed opera-
tion with an
S7-1200 CPU
• S7-1200 automation system
• ET 200MP distributed I/O
system
• TM FAST
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
Instructions
1
of the instruction
library TM FAST (Page 30);
Controlling the TM FAST ap-
plication (Page 41) via the
cyclic I/O data