Siemens Simatic S7-1500 / ET 200MP - Page 24

Configuring/address space
4.2 Parameters of the configuration software
Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA
23
Parameter
Value range
Inputs DI0 - DIQ11
Input delay DIm
• 0.001 ms
• 0.003 ms
• 0.05 ms
• 0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
• 20 ms
•
Take over from TM FAST application
1
Channels CH0 - CH7
Input delay
• 0.1 µs
• 0.2 µs
• 0.5 µs
• 1 µs
• 2 µs
• 5 µs
• 10 µs
• 20 µs
• 50 µs
• 100 µs
• 200 µs
• 500 µs
• 1000 µs
•
Take over from TM FAST application
2
Bus terminating resistor
3
• Disabled
• Enabled
1
Value is defined in the system logic parameter DI_FILTER_USER_VAL_MS
2
Value is defined in the system logic parameter RS485_TTL_FILTER_USER_VAL_MS
3
Takes effect depending on setting of RS485_TERMINATION and RS485_OR_TTL_DIRECTION
system logic parameters