Preface
Technology module TM FAST (6ES7554-1AA00-0AB0)
4 Equipment Manual, 04/2023, A5E52301130-AA
Industry Mall
The Industry Mall is the catalog and order system of Siemens AG for automation and drive
solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power
(TIP).
You can find catalogs for all automation and drive products on the Internet
(https://mall.industry.siemens.com) and in the Information and Download Center
(https://www.siemens.com/automation/infocenter).
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Products and solutions from Siemens form one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
You can find additional information on industrial security measures that may be implemented
here (https://www.siemens.com/industrialsecurity).
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply latest updates may increase customer’s exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under (https://www.siemens.com/cert).
Delete TM FAST application from flash memory
Read back of the TM FAST application is technically not provided for. You have the following
additional options to explicitly delete the application:
• Via the commissioning editor in STEP 7 (TIA Portal)
• Via the LTMFAST_ControlREC instruction in the user program of the CPU
• Via the MultiFieldbus Configuration Tool (MFCT) as of V1.5
(https://support.industry.siemens.com/cs/ww/en/view/109773881)
Apart from the application (and, if applicable, I&M data) no further data is retentively saved
on the module.
Remove TM FAST Debug Connector after commissioning
When commissioning is completed, you must disable the FPGA debug interface and remove
the TM FAST Debug Connector.
To Next Page
Loading...
