Siemens Simatic S7-1500H - Page 347

You monitor the following operand areas:
–
Inputs and outputs (process image) and bit memory
–
Contents of data blocks
–
Peripheral inputs and peripheral outputs
–
Timers and counters
•
Modifying tags
You use this function to assign values to the individual tags of a user program or a CPU on
the PG/PC. Modifying is also possible with Test with program status.
The following operand areas are modifiable:
–
Inputs and outputs (process image) and bit memory
–
Contents of data blocks
–
Peripheral inputs and peripheral outputs (for example, %I0.0:P, %Q0.0:P)
–
Timers and counters
Testing with a force table
The following functions are available in the force table:
•
Monitoring of tags
You use watch tables to monitor the actual values of the individual tags of a CPU user
program.
–
On the PG/PC
–
On the display of the CPU
You can monitor the table with or without trigger conditions.
Please note the following requirement for displaying the tag values on the CPU display:
You must specify a symbolic name for each tag in the "Name" column of the force table.
You monitor the following tags:
–
Bit memory
–
Contents of data blocks
–
Peripheral inputs
•
Forcing of peripheral inputs and peripheral outputs
You can force individual peripheral inputs or peripheral outputs.
–
Peripheral inputs: Forcing peripheral inputs "bypasses" sensors/inputs by specifying
fixed values for the program. Instead of the actual input value via a process image or
direct access, the program receives the force value.
–
Peripheral outputs: Forcing peripheral outputs "bypasses" the complete program by
specifying fixed values for the actuators.
The advantage of the force table is that you can simulate different test environments and
overwrite tags in the CPU with a fixed value. This enables you to intervene in the running
process in a regulating way.
Testing with a PLC tag table
You can monitor the current data values of tags in the CPU directly in the PLC tag table. To do
so, open the PLC tag table and start the monitoring.
You may also copy PLC tags to a watch table or force table and monitor, modify or force them
there.
347
Test and service functions
14.1 Test functions
S7-1500R/H redundant system
System Manual, 11/2022, A5E41814787-AD