Siemens Simatic S7-400 - Page 132

Approvals
CP 443-1 OPC UA
132 Operating Instructions, 01/2017, C79000-G8976-C427-02
FM
Factory Mutual Approval Standard Class Number 3600, 3611, 3810
Class I, Division 2, Group A, B, C, D, T4 or Class I, Zone 2, Group IIC, T4
Ta: Refer to the temperature class on the type plate of the CP
Certificate of Compliance: 3030463
Australia - RCM
The CP meets the requirements of the AS/NZS 2064 standards (Class A).
Marking for the customs union
EAC (Eurasian Conformity)
Customs union of Russia, Belarus and Kazakhstan
Declaration of the conformity according to the technical regulations of the customs union
(TR CU)
MSIP 요구사항 - For Korea only
Certification Number: MSIP-REM-S49-S7400CP
A급 기기(업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정 외의 지역에서 사용하는것을 목적으로 합니다.
Current approvals
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/21862/cert)
Overview of the approvals for SIMATIC NET products
You will find an overview of the approvals for SIMATIC NET products including approvals for
shipbuilding on the Internet pages of Siemens Industry Online Support under the following
address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/57337426)