CP 443-1 OPC UA
Operating Instructions, 01/2017, C79000-G8976-C427-02
29
Installation, connecting up, commissioning
Important notes on using the device
Safety notices on the use of the device
Note the following safety notices when setting up and operating the device and during all
associated work such as installation, connecting up or replacing the device.
Safety requirements for installation
Safety requirements for installation
The devices are "open equipment" according to the standard IEC 61010-2-201or UL 508 /
CSA C22.2 No. 142. To fulfill requirements for safe operation with regard to mechanical
stability, flame retardation, stability, and protection against contact, the following alternative
types of installation are specified:
• Installation in a suitable cabinet.
• Installation in a suitable enclosure.
• Installation in a suitably equipped, enclosed control room.
Notes on use in hazardous areas
Safety requirements for installation
The devices are "open equipment" according to the standard IEC 61010-2-201. To fulfill
requirements for safe operation with regard to mechanical stability, flame retardation,
stability, and shock-hazard protection, the following alternative types of installation are
specified:
• Installation in a suitable cabinet.
• Installation in a suitable enclosure.
• Installation in a suitably equipped, enclosed control room.
To Next Page
Loading...
