Siemens Simatic S7-400 - Page 18

Application and functions
1.7 Requirements for use
CP 443-1 OPC UA
18 Operating Instructions, 01/2017, C79000-G8976-C427-02
●
Fault tolerant CPUs
CPU 400H as of firmware version V6.0.5
H-CPUs with a firmware version <V6.0.5 must be upgraded where possible.
●
SIMATIC PCS 7 CPUs
SIMATIC PCS 7 CPU 410-5H as of firmware version V8.1
CPUs with a firmware version <V8.1 must be upgraded where possible.
Table 1- 1 Compatible CPUs
CPU
Article number
As of firmware version
Standard CPUs
CPU 412-1 6ES7412-1XJ05-0AB0 V5.3
CPU 412-2
6ES7412-2XJ05-0AB0
V5.3
CPU 414-2
6ES7414-2XK05-0AB0
V5.3
CPU 412-2 PN 6ES7412-2EK06-0AB0
6AG1412-2EK06-2AB0
V6.0
CPU 412-2 PN
6ES7412-2EK07-0AB0
V7.0
CPU 414-3
6ES7414-3XM05-0AB0
V5.3
CPU 414-3 PN/DP
6ES7414-3EM05-0AB0
V5.3
CPU 414-3 PN/DP 6ES7414-3EM06-0AB0
6AG1414-3EM06-7AB0
V6.0
CPU 414-3 PN/DP
6ES7414-3EM07-0AB0
V7.0
CPU 414F-3 PN/DP *
)
6ES7414-3FM06-0AB0
V6.0
CPU 414F-3 PN/DP *
)
6ES7414-3FM07-0AB0
V7.0
CPU 416-2
6ES7416-2XN05-0AB0
V5.3
CPU 416F-2 *
)
6ES7416-2FN05-0AB0
V5.3
CPU 416-3
6ES7416-3XR05-0AB0
V5.3
CPU 416-3 PN/DP 6ES7416-3ES06-0AB0
6AG1416-3ES06-7AB0
V6.0
CPU 416F-3 PN/DP *
)
6ES7416-3FS06-0AB0
V6.0
CPU 416-3 PN/DP
6ES7416-3ES07-0AB0
V7.0
CPU 416F-3 PN/DP *
)
6ES7416-3FS07-0AB0
V7.0
CPU 417-4 6ES7417-4XT05-0AB0
6AG1417-4XT05-4AB0
V5.3
CPU 417-4 6ES7417-4XT07-0AB0 V7.0
H CPUs
CPU 412-5H
**
)
6ES7412-5HK06-0AB0
6AG1412-5HK06-7AB0
V6.0.5
CPU 414-5H
**
)
6ES7414-5HM06-0AB0
6AG1414-5HM06-7AB0
V6.0.5
CPU 416-5H
**
)
6ES7416-5HS06-0AB0
6AG1416-5HS06-7AB0
V6.0.5