Siemens Simatic S7-400 - Page 120

3 Setting up functions 03/2013
3.4 Fault services
© Siemens AG 2006-2013 All Rights Reserved
3-120 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
Delete events Activate the checkbox to delete all the old
events of this control monitor that
correspond to the following specifications.
This includes attachments recorded with
the control monitor.
DISPLAY
(Toggle)
Delete events after Time after which the old events of this
control monitor are automatically deleted.
The following time units are available for
selection:
• Days
• Weeks
DISPLAY
INPUT
1 to 999 999
Maximum number
of events
In addition to a time limit for the number of
values, a quantitative limit can be entered.
When the maximum number of desired
values has been reached, the oldest values
are deleted. Thus the limit is observed.
INPUT
1 to 999 999
Display
Clipboard The clipboard can be used to temporarily
saved configurations and insert them at a
different position/machine.
ACTION
Paste The temporarily saved configurations can
be inserted at the "same" position in other
configurations/machines.
ACTION
Generate event
entry
An entry in the machine events is not
required for every control monitor.
SELECTION
DISPLAY
Must not be
deleted
If this option is selected, events cannot be
deleted from the event history.
SELECTION
DISPLAY
Priority Definition of a class used to enter events in
the machine event list, so that they can be
specifically filtered.
SELECTION
DISPLAY
(Digits from 1
to 5)
Notification limit
For notifications, maintenance or
acquisition of value series from the NC or
PLC, there is no need for an entry in the
history, since these actions are events in
and of themselves.
Number of lines The number in the display indicates the
number of lines per window that can be
shown in this menu. You can select up to
200 lines. A scroll bar will then be displayed
in the window.
DISPLAY
SELECTION
Trigger
Add Opens the submenu for adding a trigger. ACTION
Open Opens the submenu for changing a
selected trigger.
ACTION
Change Deletes a trigger from the monitor
configuration.
ACTION
Copy to clipboard Stores the copied trigger in the clipboard. ACTION