3 Setting up functions 03/2013
3.6 Copy
© Siemens AG 2006-2013 All Rights Reserved
3-196 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3.6.2 Copying function settings to several machines
Function description
This function copies any selection of configurations that the user has created
previously from a so-called source machine to a freely definable group of machines
on a 1:1 basis.
Single or several user functions can be copied concurrently or successively. Any
source machine and any target machines to which the user has access can be
selected for copying.
Fig. 3-79: Copying to several machines
Function Description Type
Source machine All configurations are listed in groups.
Selecting a group displays all configurations
contained within the group and preselects
them for copying. This preselection can be
switched on and off by selecting the group.
DISPLAY
SELECTION
+/- Selecting +/- displays the configurations in a
group or hides the display.
The preselection for copying is made by
selecting an individual configuration. The
preselection can be switched on and off by
selecting an individual configuration.
DISPLAY
SELECTION
Target
machines
All selected target machines are listed. The
target machines are selected in the 'Select
machine' menu.
In this menu, the group of target machines is
defined by selecting one or more machines,
DISPLAY
To Next Page
Loading...
