Siemens Simatic S7-400 - Cycle Time Definition; Time-Sharing Model; Process Image

03/2013 3 Setting up functions
3.4 Fault services
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3-127
Machine trigger
All actions that are available in the control monitor are initiated with a machine
trigger. A machine trigger is initiated either by control variables or by events that
take place in the control PC.
Select the required trigger type.
Add machine trigger
►
Alarm group
►
PLC triggers
►
PLC timeout triggers
►
Trigger on a new value of a user-defined variable
►
Combined machine trigger
►
Fault message at HMI
►
Time trigger
►
Variable triggers
►
Triggers on synchronization
►
Trigger on control monitor script error (only for troubleshooting)
Add server trigger
►
A measurement of a series of measurements reaches a limit value
►
Triggers when maintenance jobs are (over)due
►
Variable monitor reaches limit value
►
Cyclic trigger on variable monitor
►
Fault message on PC
►
Time trigger