Siemens Simatic S7-400 Function Manual

03/2013 Foreword
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
3
Foreword
SINUMERIK documentation
The SINUMERIK documentation is organized in the following categories:
• General documentation
• User documentation
• Manufacturer/service documentation
More information
You can find information on the following topics under the link
www.siemens.com/motioncontrol/docu:
• Ordering documentation / overview of documentation
• Additional links to download documents
• Using documentation online (finding and searching in manuals/information)
Please send any questions about the technical documentation (e.g. suggestions for
improvement, corrections) to the following address:
mailto:docu.motioncontrol@siemens.com
My Documentation Manager (MDM)
Under the following link you will find information to individually compile OEM-
specific machine documentation based on the Siemens content:
www.siemens.com/mdm
Training
You can find information about the range of training courses at the following links:
• www.siemens.com/sitrain
SITRAIN - training courses from Siemens for products, systems and solutions in
automation technology
• www.siemens.com/sinutrain
SinuTrain - training software for SINUMERIK
FAQs
You can find Frequently Asked Questions in the Service&Support pages under
Product Support. http://support.automation.siemens.com
SINUMERIK
You can find information on SINUMERIK under the following link:
www.siemens.com/sinumerik

Siemens Simatic S7-400 Specifications

General

Programming Language	STEP 7 (LAD, FBD, STL, SCL, GRAPH)
Communication Interfaces	MPI, PROFIBUS
Power Supply	24 V DC, 120/230 V AC (Power supply modules are separate and chosen based on system requirements)
Operating Temperature	0°C to 60°C
Mounting	Rack mounting
Processor	CPU 412-1, CPU 414-2, CPU 416-2, CPU 417-4 (Different CPUs offer varying performance and features)
Relative Humidity	5 to 95% (non-condensing)