03/2012 7 Establishing a connection and diagnostics
7.1 Connecting the machine
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2012
7-309
Note
After the disconnection from the server:
As soon as a machine operator contacts SINUMERIK Integrate that was
disconnected at the server side from the database, a message is displayed
informing the user that this machine is disconnected from the server. All actions
of the client are canceled, and disconnection is initiated in the client.
Operating procedure on the PC
Fig. 7-13: Disconnecting a machine on the PC
Fig. 7-14: Confirming disconnection on the PC
Function Description
OK Disconnects a machine from a connected database machine after
a confirmation prompt.
Cancel Aborts the disconnection.
To Next Page
Loading...
