2 Machine information 03/2013
2.1 Machine overview
© Siemens AG 2006-2013 All Rights Reserved
2-32 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description
Delete NC status data You cannot delete individual NC status data from
machine events; it is only possible to delete the entire
event entry.
Note:
Deleting individual details from an event constitutes
illegal manipulation of the archived document.
PLC trace
PLC trace data created with an event can be displayed in the browser and
evaluated with graphical tools. Signal curves can be checked by displaying variable
values in the graphical display, setting markings and zooming.
Fig. 2-11: PLC trace display as diagram
Function Description
Display The PLC trace is displayed for all configured variables in the
specified format.
The signal triggering the recording is displayed and selected
as 0 cycle / 0 time.
Display updates the display with the predefined details for the
PLC trace.
To Next Page
Loading...
