03/2013 2 Machine information
2.2 Variable monitors – time Series – measurements and measurement series
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
2-47
"Display" menu
This menu is only available for the individual measurement diagram of the
equability test.
Function Description
Between the markings
Adjusts the zoom factor of the diagram at the area
between the markings. Prerequisite is that both
markings have been set.
Delete markings Removes the marking bars from the display.
Reset display Displays the diagram in the previous range
selection display again.
Navigating to previous/next measurement
The two buttons for this function can be used to navigate to the previous or next
measurement of the measurement series in question.
To Next Page
Loading...
