2 Machine information 03/2013
2.2 Variable monitors – time Series – measurements and measurement series
© Siemens AG 2006-2013 All Rights Reserved
2-56 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
Enter the period as of which time deletions of
measurements and data points are to be carried
out.
Date and time - DD.MM.YYYY hh:mm
Time period
Enter the period up to which time deletions of
measurements and data points are to be carried
out.
Date and time - DD.MM.YYYY hh:mm
DISPLAY
INPUT
Value range
• Within
Delete all data entries that are in the defined
range of values.
• Outside
Delete all data entries that are above and below
the defined range of values.
DISPLAY
SELECTION
Cancel Return to the previous menu without deleting the
measurements.
ACTION
OK The deletion is prepared. ACTION
Before the data is finally deleted, a confirmation prompt appears.
Fig. 2-35: Confirm deletion
Function Description Type
OK The deletion is executed. ACTION
Cancel Return to the diagram display without deleting the
selected measurements.
ACTION
Deleting data points
If data has been recorded that is not to be saved by time or the value range, it can
be deleted.
Deletion is performed via the "Actions" menu and in the "Delete data points" drop
down list.
Fig. 2-36: Deleting data points
Fig. 2-37: Restrict delete data points
To Next Page
Loading...
