2 Machine information 03/2013
2.5 Maintenance
© Siemens AG 2006-2013 All Rights Reserved
2-84 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function
Search
Additional
function
Description Type
Due status
Due
Irrespective of the activation - event-
controlled or time-controlled - of a
maintenance job, setting the filter to "due"
permits the jobs to be selected that should
now be done.
The filter can also be used to select the other
statuses and precisely not this "due" one, in
order that these jobs do not appear in the
selection list.
The due status can specifically be used to
select the maintenance jobs that shall be
contained in the selection result.
If the due status is set as filter, but no status
is selected, then the result list will be empty.
SELECT
DISPLAY
Due status
edited
No matter how the maintenance jobs were
once initiated, only the completed jobs can
be selected.
The filter can also be used to select the other
statuses and precisely not this one, in order
that these jobs do not appear in the selection
list.
The due status can specifically be used to
select the maintenance jobs that shall be
contained in the selection result.
If the due status is set as filter, but no status
is selected, then the result list will be empty.
SELECT
DISPLAY
Due date
scheduled for
open jobs
Starting at the specified time, only the open
maintenance jobs are included in the
selection result.
Note: This filter only has an effect on new
and open maintenance jobs.
INPUT
1 to 999,999
Closed in time
period
The selection result only contains the closed
maintenance jobs after the entered date.
INPUT
DD.MM.YYYY
Responsible
organization
In order that specific plans can be made, the
selection list can be generated specifically for
a certain organization.
SELECT
DISPLAY
To Next Page
Loading...
