Technical data
20.2 Technical specifications of the CPU 414–5H PN/DP; (6ES7 414-5HM06–0AB0)
S7-400H
404 System Manual, 03/2012, A5E00267695-11
PROFINET IO
PNO ID (hexadecimal) Vendor ID: 0x002A
Device ID: 0x0102
Number of integrated PROFINET IO controllers 1
Number of PROFINET IO devices that can be
connected
256
Number of connectable IO devices for RT
of which are in line
256
256
Shared Device, supported No
Address range Maximum 8 KB inputs/outputs
Number of submodules Maximum 8192
Mixed modules count twice
Maximum user data length, including user data
qualifiers
1440 bytes
Maximum user data consistency, including user
data qualifiers
1024 bytes
Send clock cycles 250 µs, 500 µs, 1 ms, 2 ms, 4 ms
Update Time 250 μs, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms,
32 ms, 64 ms, 128 ms, 256 ms, and 512 ms
The minimum value depends on the
communication slice set for PROFINET IO, the
number of IO devices, and the amount of
configured user data.
IRT (Isochronous Real Time) No
S7 protocol functions
PG functions
Yes
OP functions
Yes
Prioritized startup
Accelerated (ASU) and Fast Startup Mode (FSU)
No
Tool change No
Changing an IO device without Micro Memory
Card or PG
Yes
4th and 5th interface
Designation of the interfaces IF1, IF2
Type of interface Plug-in synchronization module (FOC)
Usable interface module Synchronization module IF 960 (only in
redundant mode; in stand-alone mode the
interface remains free/covered)
Length of the synchronization cable Maximum 10 km
To Next Page
Loading...
