1
1-19
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
Product Brief
1.1 General information about SIMODRIVE POSMO A
SIMODRIVE POSMO A is an intelligent distributed positioning motor
connected as node to the PROFIBUS–DP field bus.
SIMODRIVE POSMO A can be operated via PROFIBUS–DP. This
means that all of the signals and data required to commission
(start–up) and operate the drive and also to evaluate faults are trans-
ferred via PROFIBUS.
Further, the positioning motor can be operated in the standalone mode.
This means that in this case, bus communications are not required in
order to move the positioning motor.
SIMODRIVE POSMO A – 75 W SIMODRIVE POSMO A – 300 W
not to scale
Fig. 1-1 SIMODRIVE POSMO A positioning motor with connection cover and gearbox
Reader’s note
The following catalog is available for SIMODRIVE POSMO A:
References: /KT654/ Catalog DA 65.4
Intelligent
positioning motor
1
To Next Page
Loading...
Need help?
General