Siemens SIMODRIVE POSMO A User Manual

6
6.2 Faults and warnings
6-234
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
6.2 Faults and warnings
6.2.1 General information on faults and warnings
When a fault or warning is detected then this is displayed in the posi-
tioning motor by setting the appropriate status signal and the fault/
warning bits in P947, P953 and P954.
The faults and warnings can be evaluated as follows:
S Via PROFIBUS in cycle operation
By reading the status signal and evaluating the bit–coded parameter
values for the faults and warnings (P947, P953 and P954).
S Via SimoCom A in online operation
The faults or warnings that have occurred are converted into an ap-
propriate fault/warning number and displayed.
Table 6-2 Overview of faults and warnings
Fault bit
Warning bit
Fault number
Warning number
for SimoCom A
Status signal Meaning
P947.0
...
P947.15
700
...
715
ZSW.3
(faults present)
Fault 700
...
Fault 715
P953.0
...
P953.15
800
...
815
ZSW.7
(warning present)
Warning 800
...
Warning 815
P954.0
... (from SW
1.4)
P954.15
900
...
915
ZSW.3 or ZSW.7
Supplementary information 900
...
Supplementary information 915
Preliminary
comment
6 Fault Handling and Diagnostics
02.9904.0108.04

Siemens SIMODRIVE POSMO A Specifications

General

Brand	Siemens
Model	SIMODRIVE POSMO A
Category	Engine
Language	English