Siemens SIMODRIVE POSMO A

6
6.2 Faults and warnings
6-237
E Siemens AG 2013 All Rights Reserved
SIMODRIVE POSMO A User Manual (POS1) – 08/2013 Edition
For faults and warnings, measures are described which can be applied
to remove/withdraw the fault/warning.
In this case, one of the possibilities specified is to replace the positioning
motor. For POSMO A – 300 W, it is also possible, corresponding to the
information given as counter–measure, to only change the drive unit.
S Replacing the positioning motor
––> refer to Chapter 7.1
S Replacing the drive unit (only POSMO A – 300 W)
––> refer to Chapter 7.3.2
Remedy
6 Fault Handling and Diagnostics
02.9904.0108.02